Technical Support Pages

 

RecoverEDGE / SCO5: Microlite BackupEDGE 3.0 03.00.xx
I've installed SCO/Xinuos 5.0.7V on Hyper-V and can't get ReccoverEDGE to boot HTML Text
RecoverEDGE / SCO5: Microlite BackupEDGE 2.2 02.02.xx
I've installed MP3 on my SCO 6 server and RecoverEDGE doesn't make media. HTML Text
I want to add a division in my divvy table by borrowing blocks from my root filesystem. HTML Text
Under RecoverEDGE for SCO 6, tape0 is not recognized during restore. HTML Text
RecoverEDGE fails with "No space on dev marry (76/1)" HTML Text
Does RecoverEDGE support Software RAID HTML Text
System reports NO OS on startup after boot recovery. HTML Text
RecoverEDGE / SCO5: Microlite BackupEDGE 2.1 02.01.xx
I want to add a division in my divvy table by borrowing blocks from my root filesystem. HTML Text
Under RecoverEDGE for SCO 6, tape0 is not recognized during restore. HTML Text
My SCO 5.0.7 server's license manager will not work after a boot recovery. HTML Text
RecoverEDGE fails with "No space on dev marry (76/1)" HTML Text
Is it possible to perform a root only restore from the command line? HTML Text
Does RecoverEDGE support Software RAID HTML Text
I installed the SCO Daylight Savings Time Patch 1.0.0 on our SCO OpenServer 5.0.x and BackupEDGE ceases to function. HTML Text
While booted to my RecoverEDGE media, the error "The AF associated with this FSP cannot be accessed!" HTML Text
System reports NO OS on startup after boot recovery. HTML Text
RecoverEDGE / SCO5: Microlite BackupEDGE 2.0 02.00.xx
I want to add a division in my divvy table by borrowing blocks from my root filesystem. HTML Text
Under RecoverEDGE for SCO 6, tape0 is not recognized during restore. HTML Text
My SCO 5.0.7 server's license manager will not work after a boot recovery. HTML Text
RecoverEDGE fails with "No space on dev marry (76/1)" HTML Text
Is it possible to perform a root only restore from the command line? HTML Text
Does RecoverEDGE support Software RAID HTML Text
System reports NO OS on startup after boot recovery. HTML Text
RecoverEDGE / SCO5: Microlite BackupEDGE SS 01.02.xx
I want to add a division in my divvy table by borrowing blocks from my root filesystem. HTML Text
My SCO 5.0.7 server's license manager will not work after a boot recovery. HTML Text
Is it possible to perform a root only restore from the command line? HTML Text
Does RecoverEDGE support Software RAID HTML Text
I get the error "Cannot Find Required Operating System Files" while making RecoverEDGE diskettes. HTML Text
RecoverEDGE complains 'Missing /bin/[' HTML Text
System reports NO OS on startup after boot recovery. HTML Text
RecoverEDGE / SCO5: Microlite BackupEDGE 01.01.xx
I want to add a division in my divvy table by borrowing blocks from my root filesystem. HTML Text
Is it possible to perform a root only restore from the command line? HTML Text
Does RecoverEDGE support Software RAID HTML Text
I get the error "Cannot Find Required Operating System Files" while making RecoverEDGE diskettes. HTML Text
I can run RecoverEDGE from the command line, but not from edgemenu HTML Text
RecoverEDGE complains 'Missing /bin/[' HTML Text
Sorry Couldn't Set NBUFS/NPROCS/NINODES! HTML Text
When I try to create recovery diskettes, I get the error message "Floating Point Exception - Core Dumped." HTML Text
RecoverEDGE fails to see the primary IDE drive, though it will recognize the SCSI secondary drive. HTML Text
RecoverEDGE fails to run divvy from the recovery diskettes HTML Text
While generating recovery diskettes, I get the error message "Kernel Still Too Large After Shrinkage" HTML Text
Using a monochrome monitor and booted off the recovery diskettes, screen appearance and cursor behavior are abnormal. HTML Text
Should a /boot filesystem be created for SCO OS5? HTML Text
Emergency Boot/Filesystem Floppy Creation Fails with 'Device Name not Found for 0-0' HTML Text
After boot recovery, the system complains that /boot is not found. HTML Text
System reports NO OS on startup after boot recovery. HTML Text
Recovery diskette creation fails with the error message "Error getting nlist information". HTML Text
System reports Stage 1 boot failure: error loading hd(40)/boot after recovery HTML Text
What is the proper procedure for performing a root (/) filesystem only restore through RecoverEDGE 2? HTML Text
I have multiple host adapters of different brands, RecoverEDGE doesn't identify them correctly on the drive reports. Will boot recovery still work? HTML Text
RecoverEDGE reports 'Error Flipping Pipe' or 'Error Performing Pipe Flip' during root/boot diskette creation. HTML Text
Ramdisk creation fails when booting from the recovery diskettes. HTML Text
RecoverEDGE / SCO5: Microlite BackupEDGE 01.00.xx
RecoverEDGE complains 'Missing /bin/[' HTML Text

 

 

Last Updated - 2022/01/03

 

Top
MENU