Technical Support Pages

 

Title
Problem using 2 NIC cards on SCO 6 or UnixWare with RecoverEDGE
Keywords
net0 net1 NIC UnixWare SCO 6.0.0 NETFILES iface_info
Product Release(s)
02.03.01 build 3
Operating System(s)
SCO Openserver 6.0x
SCO UnixWare 7.1.x
Problem Description
When initializing the Network with 2 Network cards installed, RecoverEDGE fails with the message:

Cannot open..../dev/net1

Then the message "Network Support Initialized".

However, our URL resource is attached to /dev/net1 and we cannot access it.

Cause
Although RecoverEDGE detected the second nic and didn't include it. This problem will be addressed in a later release of BackupEDGE.
Solution
To remedy this problem edit the file NETFILES found in /usr/lib/edge/recover2.

Add an entry for /dev/net1 and save the change. You must then recreate and test your RecoverEDGE media.

Notes
Get a printer-friendly version of this document

 

 

Last Updated - 2018/05/16

 

Top
MENU