www.microlite.com

 

 

Technical Support

Up Higher Level

Download a FREE BackupEDGE Demo!

 

 

Microlite BackupEDGE Technical Support

Title
Verify failed with error 25
Keywords
verify error 25 edgemenu BackupEDGE edge index nightly backup failed
Product Release(s)
01.01.07, 01.01.08, 01.02.0x
Operating System(s)
All Supported
Problem Description
The verify failed with an error 25.
Cause
This error is caused by the edge.index program failing due to either a missing or corrupt database, or an unexpected end of media error.
Solution
This may initially be remedied by cleaning the tape drive or the introduction of new media into the backup routine.

If this offers no relief, turn off indexing and attempt to verify the tape again. If this succeeds, run the following command from the command line.

/usr/lib/edge/bin/edge.index -b {block factor} -d {tape device}

If you see a failure message, email the results to support@microlite.com

Get a printer-friendly version of this document

Last Modified Tuesday, September 02, 2008
Site Content Copyright ©1999-2008 by Microlite Corporation. All Rights Reserved